First time iPad setup for using the Sport Scope app

Go to your iPad Wi-Fi settings and select an Internet connection. Please note that if you are currently connected to your Sport Scope Wi-Fi, you are NOT connected to the internet. 

Connect to a network that has internet such as:

• a personal home wifi network
• a public or school network
• or a cell phone Hotspot

To install apps, you must sign in with your Apple ID or create one .

• Then enter Sport Scope in the search bar (at the top). 

• Tap INSTALL 

• Turn off Bluetooth
  • Open the Settings app 
  • On the left-hand side, find "Bluetooth" and turn it off

• Turn off screen Auto-Lock:

  • In the iPad settings, find and select "Display & Brightness" on the left-hand side.
  • Look for "Auto-Lock" towards the bottom and tap on it.
  • Set the Auto-Lock duration to "Never" to prevent the iPad from going to sleep during a game.
    This article is more in-depth on how to turn off Auto-Lock Prevent an iPad from going to sleep

• Turn off Siri

  • In the iPad settings, find and select "Siri & Search" on the left-hand side.
  • Look for "Listen for, Press Home for Siri" towards the top to ensure both are off. 

• Location Services

  • Open the Settings app 
  • Find and select "Privacy and Security" on the left-hand side.
  • Tap on "Location Services" to ensure it is turned on.
  • Scroll down to the list of apps on the left-hand side again
  • Find and select "Sport Scope" toward the bottom
  • Set the location access to "Always."

• Local Network

  • In settings on the left-hand side, scroll down to the bottom and select "Sport Scope".
  • Ensure that the switch for "Local network" is activated (indicated by a green toggle bar).
  • Confirm that the location access is set to "Always" or "While Using the App".
• Warning: MDM Management Software
  • Schools sometimes have software that is intended to keep kids out of trouble when using school iPads. While we completely understand this concern, Sport Scope equipment is used entirely offline, removing any risk of misuse.
  • While these can sometimes include app permissions, it can also involve some restrictions regarding network traffic which can keep new games from being able to be created or shared with other iPads. We strongly recommend, if possible, that Sport Scope iPads do not have any software put on them from the school, and instead maybe forget Wifi passwords after they've been used to download the app.
  • You can sometimes check to see if management software is in use by going to:
    • Settings > General > VPN & Device Management and seeing if there's an entry there.

• Control iPad Settings - Make sure the following is set accordingly on the Control iPad ONLY:
  • If you have a multi-angle system only the Smart Camera "endzone" angle should have live feed On from the Cameras page
  • For example, if you have a pressbox angle camera DO NOT turn on the live feed on the Cameras page. Make sure it is OFF:
    • 
  • Once you've created your first game, un-collapse the control panel on the Control iPad Home screen ONLY and do not collapse again:
    •  
• Replay iPad(s) Settings - Make sure the following is set accordingly on the Replay iPad(s) ONLY:
  • Go to the Preferences page and turn Enable Live Feed OFF on each Replay iPad:
    • 
    • You will experience lag and network issues if more than one iPad has this setting turned on

• Once you've created your first game, un-collapse the control panel on the Home screen and do not collapse again:
  • 
  • Go to the Preferences page and make sure Enable Live Feed is ON on your control iPad:
    • 

• DO NOT turn on the live feed on the Cameras page for ANY of your camera angles. Make sure it is OFF:
  • • 
• Control/Record iPad ONLY: Once you've created your first game, un-collapse the control panel on the Control/Record iPad Home screen ONLY and do not collapse again:
  • •